![background image](http://html1.mh-extra.com/html/omron/fq2-s4/fq2-s4_user-manual_742879298.webp)
Controlling Operation and Outputting Data with the Sensor's Standard Parallel Connection
296
FQ2-S4 User’s Manual
Sample Ladder Program
This sample program is used to input IN5 to re-register a model.
• I/O Signal Allocations
If the cycle time is too long, the PLC may not be able to detect when the BUSY signal is ON. If necessary, turn
OFF W0.00 after a suitable time elapses.
Signal
Address
Output signals
OUT1 (BUSY signal)
CIO 0.01
Input signals
IN0
CIO 1.08
IN1
CIO 1.09
IN2
CIO 1.10
IN3
CIO 1.11
IN4
CIO 1.12
IN5
CIO 1.15
The BUSY signal will be ON while the model is being re-registered.
MOV
#800
Q:1
TMHH
0000
#5
TMHH
0001
#2
SET
IN5
RSET
IN5
SET
W0.01
W0.00
T0000
IN5
OUT1
BUSY
W0.00
RSET
W0.00
T0001
BUSY
Model
re-register bit
Model
re-register bit
When the mode re-register bit (W0.00) turns
ON, IN3 is turned ON.
If the BUSY signal is OFF 5 ms after IN3 turns
ON, the command input for registering the
mode again (IN5) is turned ON.
The command input for registering the mode
again (IN5) is kept ON for 2 ms and then
turned OFF.
When the BUSY signal turns OFF to indicate
that model has been re-registered, processing
after re-registration is performed (W0.01
turned ON).
Note
Important
Summary of Contents for FQ2-S4
