36mm
36mm
60.0mm
3G/HD-SDI
1. Please check whether lens mount type is a M12 mount.
2. Spring washer is to be inserted between a lens and a mount.
3. Go to the camera setup and set the LENS mode as ESC.
Fixed Focal Lens
M12 mount
【
1
】
2
】
【
4
】
【
【
3
】
【
1
】
【
2
】
【
3
】
SDI Out
【
4
】
POWER LED
HDMI
I/O
HDMI
MAIN I/O
MAIN I/O
12VDC
AUDIO
RS-485
OSD Control
SPECIFICATIONS
Image Sensor
1/3” Progressive CMOS (Approx. 2.1 mega)
Scanning System
16:9 Progressive
Sync. System
Internal
Effective Pixel
1920(H) x 1080(V)
Min. Illumination
0.2Lux (Day), 0.1Lux (Night), 0.005Lux (DSS on)
Horizontal Resolution
1,000TVL
Optics Lens
Fixed HD lens
WDR/BLC
HLC (High Light compensation)
Exposure
Auto / Manual
Auto (3,000°K~8,000°K)
ATW (1,900°K~11,000°K)
Manual
Day & Night System
AGC / TDN (ICR)
NTSC: 1/30~1/30000
PAL: 1/25~1/30000
DSS ( ~X64)
Privacy Mask, Image Mirror, 3DNR, Flickerless
Sharpness, Defog, DIS (Digital Image Stabilizer)
Motion Detection, DSS (Digital Shutter Speed)
SMPTE 292M (1.485Gbps)
1080p@25/30 or 29.97
1080i@50/60 or 59.94
720p@50/60 or 59.94
720p@25/30
SMPTE 424M (2.97Gbps)
1080p@50/60 or 59.94
800mVp-p, 75
Ω
, Unbalanced Generator (Single-Ended)
HDMI 1.3 compliant (Embedded Audio)
1920x1080p@50/60 or 59.94
1920x1080i@50/60 or 59.94
1920x1080p@25/30 or 29.97
1280x720p@50/60 or 59.94
1280x720p@25/30
Mic Level (1Vrms). 2.5V Mic bias
Bit Depth: 16,20,24,32Bits. 48KHz sample rates
Gain : -12dB ~ 59.5dB
PELCO-P/D, SONY-VISCA Protocol
8Bits Data, 1Stop Bit, No Parity, 2400~115200bps
Operation Temperature
-10
℃
~ 50
℃
Power Input
12VDC (7VDC to 15VDC)
Power consumption
Max 6W
Dimensions
.
Net Weight
Video
Output
SDI (BNC)
Control RS-485
General
Audio
Input
MIC Input
HDMI (HDMI Type A)
CV505
Sensor
Functions
Back Light Compensation
White Balance
Electronic Shutter
Functions
Spring Washer
Marshall Electronics
·
2.5 Megapixel 1/3-inch CMOS Sensor
·
3.7mm Megapixel M12 Prime Lens installed (interchangeable)
·
CV505-MB:
1920x1080p59.94/29.97, 1920x1080i59.94,
1280x720p59.94/29.97fps
·
CV505-M:
1920x1080p60/50/30/25, 1920x1080i60/50,
1280x720p60/50/30/25fps
·
3G/HD-SDI (BNC) & HDMI (full size v1.3) built into rear panel
·
Lemo-style (I/O) connector contains
·
Audio Mic Stereo (TRS) input embedding
w/ 2.5V power supply (embeds 3G/HD-SDI & HDMI)
·
OSD Menu Joystick, RS-485 connectable (Pelco/Visca)
·
12VDC
Precautions
WARNING
!
Do not use the camera if fumes, smoke or a strange odor is emitted
from the unit, or if it seems to not function correctly. Disconnect the
power source immediately and consult your supplier.
CA UTION
Always follow the instructions in the installation guide when
applying power. Fire and equipment damage can occur if power
is applied incorrectly. For the correct power supply, refer to the
CA UTION
Do not install or operate in small, unventilated areas. Heat build up
CA UTION
To prevent damage, do not drop the camera or subject it to strong
CA UTION
If installed close to a TV, radio transmitter, magnet, electric motor
interfere with or distort
the image.
CA UTION
Whether or not the camera is used outdoors, never point it toward
the sun. Use caution when operating the camera in the vicinity of spot
CA UTION
Do not use the camera in extreme environments where high
temperatures or high humidity exists. Use the camera under
conditions where temperatures are between 14°F ~ 122°F (-10°C ~
50°C), and humidity is below 90%.
shock or vibration.
Rear Panel Video/Power Connection
Specifications
Dimensions
How to Change a Fixed Focal Lens
36(W) x 36(H) x 45(D)mm
Approx. 140g (With Lens)
CV505-MB/M
Quick Start Guide
Full-HD (3G/HD-SDI) 2.5MP Mini-Broadcast
POV Camera with 3.7mm 2MP Lens
LCDracks.com
Features
