Logging Measurement Data and Image Data
FQ2-S4 User’s Manual
261
7
C
onven
ient Fu
ncti
ons
• File format
Statistical data:
The data is saved in the following CSV format.
Number of measurements, number of OKs, number of NGs, OK rate, NG rate (delimiter)
Image data:
Image data is saved in a special format for OMRON Vision Sensors.
(The file name extension is IFZ.)
Measurement data:
Measurement data is saved in CSV format.
The same format is used to log the most recent results to files for the inspection item region and expression
region in the file logging function.
File Logging Format: Items 8 and 9 on p. 256
The recent log data will be cleared if the scene is changed.
Changing the Format for Saving Measurement Data
The output CSV file format can be changed according to the external device.
Changing the File Format: p. 256
• The saved recent measurement data cannot be loaded back into the Sensor and displayed on a trend monitor or histo-
gram.
• The data and time are not recorded with the measurement data.
The file name is created from the time when the file is saved. It does not indicate when the measurement was made.
Note
Important
Summary of Contents for FQ2-S4
