![background image](http://html1.mh-extra.com/html/omron/fq2-s4/fq2-s4_user-manual_742879251.webp)
Connecting to More Than One Sensor
FQ2-S4 User’s Manual
249
7
C
onven
ient Fu
ncti
ons
Selecting the Sensors to Connect
You can select the Sensors to connect to the Touch Finder from a list.
(Run Mode)
−
[Sensor monitor]
−
[Multi sensor]
3
Enter the IP address.
4
Press the IP address that you entered, and then press
[Comm. test] to confirm that connection is possible.
1
Press
[
]
−
[Specify sensor] on the right of the dis-
play.
2
Press the check boxes of the Sensors to connect to
select them.
• The Sensors that can be set are indicated by an asterisk before
the Sensor name.
• You cannot select the check box if a Sensor that was registered
by the user cannot be detected.
• The names of Sensors that are on the same network as the
Touch Finder are given in parentheses.
Note
Summary of Contents for FQ2-S4
