![background image](http://html1.mh-extra.com/html/omron/fq2-s4/fq2-s4_user-manual_742879259.webp)
Logging Measurement Data and Image Data
FQ2-S4 User’s Manual
257
7
C
onven
ient Fu
ncti
ons
Starting and Stopping Logging
After logging is started (i.e., set to ON), the specified image data and measurement data will be saved in the
SD card or computer hard disk each time measurements are performed.
(Run Mode)
1
Press [Logging].
2
Press [Image logging] or [Data logging].
3
Press [ON] to start logging.
Press [OFF] to stop logging.
4
Press [Back].
Ensuring That All Measurement Results Are Logged in External Memory
To ensure that all measurement results are actually saved, change the settings so that the BUSY signal
remains ON until logging has been completed. During operation, do not input the next trigger until the BUSY
signal turns OFF.
[In/Out]
−
[I/O setting]
−
[I/O terminals]
−
[Output] Tab Page
−
[BUSY output]
Change the BUSY output parameter to [Data logging].
To save logged data, you must first select either [All] (all data is saved) or [Only NG] (only NG data is saved) in the
logging parameters.
Setting Logging Conditions: p. 253
• File logging cannot be used when performing continuous measurements.
• If you use the PC Tool, the logging time may vary by up to 100 ms depending on the application conditions of your
computer.
• If logging data to an SD card, the write time varies depending on the amount of the available space on the SD
card.
Reference value: For SDHC class 4, the time required to write image data is approx. 200 to 800 ms.
Note
Data
Logging
Display
Measurements
Image input
Sensor
Touch Finder
Trigger signal
Image
Logging
BUSY
ON
OFF
Note
Summary of Contents for FQ2-S4
