Installation Instructions
7 Inch Wireless Colour Camera System
Page 1 of 6
Do not install and/or operate this safety product unless you have read and understand the
safety information contained in this manual.
1. Proper installation combined with operator training in the use, care, and maintenance of safety products are essential to
ensure the safety of you and those you are trying to protect.
2. Exercise caution when working with live electrical connections.
3. This product must be properly grounded. Inadequate grounding and/or shorting of electrical connections can cause high
current arcing, which can cause personal injury and/or severe vehicle damage, including fire.
4. Proper placement and installation are vital to the performance of this safety product. Install this product so that the
performance of the system is maximized and the controls are placed within convenient reach of the operator so that
s/he can operate the system without losing eye contact with the roadway.
5. It is the responsibility of the vehicle operator to ensure during use that all features of this product work correctly. In use,
the vehicle operator should ensure the field-of-view of the camera/monitor is not blocked by vehicle components (i.e., open
trunks or compartment doors), people, vehicles, or other obstructions.
6. Never take the right-of-way for granted. It is your responsibility to be sure you can proceed safely before entering an
intersection, driving against traffic, responding at a high rate of speed, walking on or around traffic lanes.
7. This equipment is intended for use by authorized personnel only. The user is responsible for understanding and
obeying all laws regarding safety products. Therefore, the user should check all applicable city, state, and federal laws and
regulations. The manufacturer assumes no liability for any loss resulting from the use of this safety product.
IMPORTANT!
Read all instructions before installing and using. Installer: This manual must be
delivered to the end user.
Failure to install or use this product according to manufacturers recommendations may result in property
damage, serious bodily/personal injury, and/or death to you and those you are seeking to protect!
!
WARNING!
The Gemineye™ wireless camera system features
2.4GHZ digital signal transmission and offers quality
and functionality equal to wired systems. Featuring a 7”
LCD colour monitor and a CMOS infrared camera, this
system delivers excellent picture quality. The system is
expandable to operate up to 4 separate cameras
(EC2028-WC only), each with independent trigger
wires and all using a wireless signal to transmit image
data to the monitor. This system dramatically reduces
installation complexity and expense while eliminating
the potential for wires being damaged during operation
of the vehicle. Quad view split screen enabled.
