manualshive.com logo in svg

MUTOH ValueJet VJ-1324, Maintenance Manual, Page: 41 / 439

Share
Download
MUTOH ValueJet VJ-1324 Maintenance Manual Download Page 41

2.2 Troubleshooting with Error Messages

VJ1324E-M-02

2.2.3 Errors Requiring Reboot

P.2-27

8

E072 Err 
CR Current
E074 Err 
CR2 Current
E092 Err
CR Over Load

An overload 
condition is 
detected in CR 
motor (Y-axis) 
during printer 
operation.

1. Check error history from "Test: Record" of self-

diagnosis function.

-

"5.5.9 Record Menu" p.5-18

2.

Move carriage in both directions while the printer is turned 
off, and check if there is any position where carriage does not 
move smoothly. 

Clean and lubricate CR rail roller guide.

"7.5 Lubrication/Bonding" p.7-

7

3.

Set the number of endurance running cycles to 50 or more 
from "Life1 : CR motor" of self-diagnosis function, and check 
if "CR Current" or “CR2 current” occurs.

•

Check the connection of the following 
connectors.

MAIN Board Assy

：

• CR motor relay Assy connector
• CR_FFC connectors

CR board Assy

：

• CR_FFC connectors

"3.4.4 Replacing MAIN Board 

Assy" p.3-42

"5.12 Endurance Running 

Menu" p.5-71

"3.7.4 Replacing CR Board 

Assy" p.3-101

4.

Check if T fence is contaminated or worn out.

•

If grease or dust is adhered: Wipe T fence with a 
dry cloth.

•

If ink is adhered: Wipe it off lightly with a cloth 
dampened with neutral detergent.

•

If contamination or deposit is too heavy: Replace 
T fence.

"3.6.7 Replacing T Fence, T 

Fence Spring Assy" p.3-93

5.

Check "Encoder: CR" from "Check: Test” -"Test5: Encoder" 
of self-diagnosis function.

When failed:
a)Check the connection of the following locations.
•

CR board Assy connector

b) Replace the following parts.
•

Ｔ

 Fence

•

CR Motor Assy

•

CR Board Assy

•

CR_FFC

"3.7.4 Replacing CR Board 

Assy" p.3-101

"3.11.3 Replacing  CR_FFC" 

p.3-154

9

E081 Err
CR Origin

CR_HP cannot be 
detected.

1.

Check CR origin sensor in “Sen.: CR Origin” in the self-
diagnosis function. 
(Check if “ON” is displayed when Carriage is locked and 
“OFF” is displayed when Carriage is moved.)

 

Check the connection of CR origin sensor relay  Assy  
connector. 

"5.5.4 Sensor Menu" p.5-12

2.

CR origin sensor may be damaged.

Replace CR origin sensor.

"3.6.3 Replacing CR_HP 

sensor" p.3-89

3.

MAIN board  Assy  may be damaged.

Replace MAIN board  Assy  

"3.4.4 Replacing MAIN Board 

Assy" p.3-42

No.

Message

Symptoms

Check Item

Action

Reference

Summary of Contents for ValueJet VJ-1324
























































































































































































































































































































































































































































Reviews:

No comments