manualshive.com logo in svg

MUTOH ValueJet VJ-1324, Maintenance Manual, Page: 258 / 439

Share
Download
MUTOH ValueJet VJ-1324 Maintenance Manual Download Page 258

3.13.6 Replacing Take-Up ON Sensor and Take-Up OFF Sensor

P.3-176

3.13 Replacing Take-Up Unit (Option)

VJ1324E-M-02

3.13.6 Replacing Take-Up ON Sensor and Take-Up OFF 

Sensor

(1) Replacing Take-Up ON Sensor Relay  Assy  and Take-Up OFF Sensor 

Relay  Assy 

This section describes the procedure to replace take-up ON sensor relay  Assy  (Maintenance number: 
DG-40480, Maintenance part name: W_ON sensor  Assy ) and take-up OFF sensor relay  Assy  
(Maintenance number: DG-40481, Maintenance part name: W_OFF sensor  Assy ).

1. Remove take-up scroller.

2.

Remove tension arm.

"3.13.1 Removing Tension Arm" p.3-162

3.

Remove take-up unit.

"3.13.2 Removing Take-Up Unit" p.3-164

4.

Remove board chassis.

"(1) Removing Board Chassis" p.3-169

 of 

"3.13.5 Replacing Take-Up Unit Control 

Board Assy" p.3-169

5.

Remove cables for take-up ON sensor relay Assy and take-up OFF sensor relay 
Assy from the connector to take-up control board Assy.

6.

Remove take-up ON sensor relay Assy and take-up OFF sensor relay Assy from take-up ON and 
OFF sensors.

7.

Replace take-up ON sensor relay Assy and take-up OFF sensor relay Assy 

8.

To reassemble the unit, reverse the removal procedure.

No.

Name

1

Take-up control board Assy 

2

Cable for take-up ON sensor relay Assy and take-up OFF sensor 
relay Assy 

1

2

No.

Name

1

Take-up ON sensor

2

Take-up OFF sensor

3

Take-up ON sensor relay Assy 

4

Take-up OFF sensor relay Assy 

1

4

2

3

Summary of Contents for ValueJet VJ-1324
























































































































































































































































































































































































































































Reviews:

No comments