manualshive.com logo in svg

MUTOH ValueJet VJ-1324, Maintenance Manual, Page: 95 / 439

Share
Download
MUTOH ValueJet VJ-1324 Maintenance Manual Download Page 95

3.2.4 Removing Front Cover and Replacing Front Cover Holder

P.3-13

3.2 Removing Covers

VJ1324E-M-02

3.2.4

Removing Front Cover and Replacing Front Cover 
Holder

1.

Open Front Cover. 

2.

Remove front cover by pulling it toward the direction of the arrow shown below.

3.

Unhook and remove the front cover holder by pushing it toward the direction of the arrow shown 
below and remove.

4.

Replace front cover holder.

NOTE

Do not remove front cover by force. It may damage or deform the resin.

5.

To reassemble unit, reverse the removal procedure.

No.

Name

1

Front cover

2

Front cover holder

No.

Name

1

Front cover holder

2

1

1

2

2

Front cover holder hook

No.

Name

Summary of Contents for ValueJet VJ-1324
























































































































































































































































































































































































































































Reviews:

No comments