MUTOH ValueJet VJ-1324, Maintenance Manual, Page: 395 / 439

8.2.1 Front Section P.8-2
8.1 Introduction VJ1324E-M-02
8.1 Introduction
This chapter explains the features, part names and functions of this printer.
8.2 Part Names and Functions
Part names and functions are explained below.
8.2.1 Front Section
Table 8-1 Part Names and Functions of Front Section
No. Name Function
1 Front cover Keeps the operator safe from the drive parts of the printer while it is
operating.
Opened and closed when media is set or jammed.
It is normally closed.
2 Dedicated stand Used to set the printer on the level surface of the floor.
3 Media guide Feeds the media smoothly when printing and/or setting the media.
The heater (After Heater) for drying ink is installed inside.
4 Front cover Keeps the operator safe from the drive parts of the printer while it is
operating.
Opened and closed when media is set or jammed.
It is normally closed.
5 Dedicated stand Used to set the printer on the level surface of the floor.
6 Media cut groove Installed inside of the front cover.
Used to cut printed media straight.
7 Pressure roller Installed inside the front cover.
Presses the media from above and holds it when printing.
8 Platen Installed inside the front cover.
The heater (platen heater) for drying ink is installed.
9 Maintenance cover Protects users from the mechanical parts inside the printer in the
following cases:
- Cleaning the cleaning wiper
- Cleaning around the print head
This cover must usually be closed.
10 Connector Used to install spectrophotometer (SPECTROVUE VM-10).