MUTOH ValueJet VJ-1324, Maintenance Manual, Page: 141 / 439

3.4.16 Other Cable Assy and Serial Cable Assy P.3-59
3.4 Replacing Board Base VJ1324E-M-02
3.4.16 Other Cable Assy and Serial Cable Assy
CAUTION
When handling boards, do NOT touch the elements on the boards.
Elements may be destroyed by static electricity.
The following Maintenance parts are discussed in this chapter.
• MAIN-CNT Cable Assy
（
connected to MAIN board Assy
）
• Power Cable MAIN-CNT Assy
• MAIN-DCCableAssy
• Terminal Block-Power Cable Assy
• AC Cable Fuse-Terminal Block Assy
• AC Cable Terminal Block-CNT Assy
• RLY-ACCableAssy
• AC Cable CNT-RLY Assy
1. Remove Paper Guide R2.
"3.2.7 Removing Paper Guide R2" p.3-17
2. Remove Cable from clamps on the path.
3. Referring following Table,Remove the connector from Boards.
4. Replace the cable.
5. To reassemble the unit, reverse the removal procedure.
CableName Connected to
MAIN-CNT Cable Assy
J6
（
MAIN Board Assy
）
J10 （ HEATER CONT Board Assy ）
Power Cable MAIN-CNT Assy
J34
（
MAIN BoardAssy
）
J19 （ HEATER CONT Board Assy ）
MAIN-DCCableAssy
J35
（
MAIN Board Assy
）
CN301(Power Board Assy ）
Terminal Block-Power Cable Assy Terminal Block
CN001(Power BoardAssy
）
AC Cable Terminal Block-CNT Assy Terminal Block
J22
（ HEATER CONT Board Assy ）
RLY-ACCableAssy
J4
（
HEATER RELAY BoardAssy)
J6 （ HEATER RELAY Board Assy)
AC Cable CNT-RLY Assy
J1
（
HEATER CONT Board Assy)
J23 （ HEATER RELAY Board Assy)
AC Cable Fuse-Terminal Block Assy Fuse
Terminal Block