manualshive.com logo in svg

MUTOH ValueJet VJ-1324, Maintenance Manual, Page: 248 / 439

Share
Download
MUTOH ValueJet VJ-1324 Maintenance Manual Download Page 248

3.13.4 Replacing Scroller

P.3-166

3.13 Replacing Take-Up Unit (Option)

VJ1324E-M-02

3.13.4 Replacing Scroller

(1) Replacing Holding Roller

1.

Remove take-up scroller.

2.

Remove tension arm.

"3.13.1 Removing Tension Arm" p.3-162

3.

Remove the E ring (1 piece) retaining holding roller with flat head screwdrivers etc.

4.

Remove holding roller and its accessories.

NOTE

The accessories attached to holding roller when it is removed are as follows:

• Bearing
• Supporting shaft
• Flat washer (polished) M6
• E-type snap ring E-5

5.

Replace holding roller and its accessories.

6.

To reassemble unit, reverse the removal procedure.

No.

Name

1

Holding roller

2

E ring retaining holding roller (E-6)

1

2

Summary of Contents for ValueJet VJ-1324
























































































































































































































































































































































































































































Reviews:

No comments