MUTOH ValueJet VJ-1324 Maintenance Manual Download Page 202

Page: 202 / 439

3.7.8 Replacing Ink Tube

P.3-120

3.7 Replacing Carriage Peripherals

VJ1324E-M-02

(3) Solenoid Tube Assy

－

Ink Cartridge

Perform ink drainage operation and drain ink from all the ink path.

Remove Front Cover.

"3.2.4 Removing Front Cover and Replacing Front Cover Holder" p.3-13

Remove Top Cover.

"3.2.6 Removing Top Cover" p.3-16

Remove I/H Cover.

"3.2.1 Removing I/H Cover" p.3-7

Remove Side Cover R.

"3.2.2 Remove Side Cover R" p.3-8

Remove I/H Cover.

"3.2.1 Removing I/H Cover" p.3-7

Remove Ink Tube from Joint of back side of Ink Cartridge.

NOTE

K,C,M are L type fittings, and Y is I type fitting.

Remove screws (2 pieces) retaining Solenoid .

Remove Solenoid Cable from clamp.

10. Remove Solenoid Assy.

No.

Name

Ink Tube

Joint

Cartridge Holder

No.

Name

Solenoid Cable

Pan-head screw with spring washer and flat washer

Ｍ３ ×

Clamp

Summary of Contents for ValueJet VJ-1324
















































































































































































































































































































































































































































Search results

Summary of Contents for ValueJet VJ-1324

Reviews:

MUTOH ValueJet VJ-1324, Maintenance Manual, Page: 202 / 439

Search results

Summary of Contents for ValueJet VJ-1324

Reviews: