manualshive.com logo in svg

MUTOH ValueJet VJ-1324, Maintenance Manual, Page: 400 / 439

Share
Download
MUTOH ValueJet VJ-1324 Maintenance Manual Download Page 400

8.3.1 Operating Status Type

P.8-7

8.3 Printer Status

VJ1324E-M-02

8.3

Printer Status

The status of the printer is explained below.

8.3.1

Operating Status Type

(1) Normal

Indicates that the printer can print when media is loaded.
Each setup concerning printing can be operated by using Operation panel.

T I P

『

Operation manual

(2) Setup Menu

Each setup concerning printing can be operated by using Operation panel.
The settings required for normal printing are usually made on the printer driver or application, but can 
also be made using Operation panel.

T I P

『

Operation manual

(3) Self-Diagnosis Function

Indicates that each settings concerning printing using Operation panel. Names and functions of 
Operation panel keys are the same as those of setup menu display.

T I P

"5.3 Operations in Self-Diagnosis Mode" p.5-4

(4) Maintenance Mode 2

Indicates that each setup concerning to the life counter on this printer can be operated by using 
Operation panel. Names and functions of Operation panel keys are the same as those of setup menu 
display.

T I P

"6.2.1 Starting Up the Maintenance Mode 2" p.6-2

Summary of Contents for ValueJet VJ-1324
























































































































































































































































































































































































































































Reviews:

No comments