manualshive.com logo in svg

MUTOH ValueJet VJ-1324, Maintenance Manual, Page: 193 / 439

Share
Download
MUTOH ValueJet VJ-1324 Maintenance Manual Download Page 193

3.7.7 Replacing Solenoid Head Assy

P.3-111

3.7 Replacing Carriage Peripherals

VJ1324E-M-02

3.7.7

Replacing Solenoid Head Assy

T I P

Replacing Procedure For Maintenance Part:Solenoid Head Assy.
This part will be referred to as the Solenoid Head Assy in this manual.

(1) Pour Cleaning fluid into the new  Solenoid Head Assy and let it settle for a while.
(2) Replace the faulty  Solenoid head Assy.

(1) Pouring Cleaning liquid

For a test and quality maintenance, the Solenoid head Assy for VJ-1324 is filled with the water-
based cleaning liquid when that is ship.

CAUTION

• Make sure to pour Cleaning fluid into the new Solenoid head Assy.

If ink is charged before Cleaning liquid is poured in, Solenoid head might get 
damaged.

• Be careful not to get Cleaning liquid in your eyes.If Cleaning liquid gets in your 

eye, immediately wash your eye with running water for over 15 minutes and 
see your ophthalmologist.

The tools required for pouring Cleaning liquid are as follows:

• Solenoid head cleaning jig (Maintenance number: DG-41787. Maintenance part name: 

Solenoid head cleaning kit (VJ ink)) 

• Cleaning liquid (for Eco solvent ink)

NOTE

For the following procedure, Solenoidhead cleaning jigs are separated into two parts and 
called Solenoid head cleaning jig 1 and 2, for the sake of convenience.

No.

Name

1

Solenoid head cleaning jig 1

2

Solenoid head cleaning jig 2

2

1

Summary of Contents for ValueJet VJ-1324
























































































































































































































































































































































































































































Reviews:

No comments