MUTOH ValueJet VJ-1324, Maintenance Manual, Page: 332 / 439

5.7.6 Uni-D/Bi-D Adjustment Menu P.5-46
5.7 Adjustment Menu VJ1324E-M-02
(2-d)Bi-D adjustment pattern
（
When Print3 is selected
）
Printing speed is different in each item.
Prints out all adjustment patterns (Print2).
Printing items are as shown below.
About adjustment pattern, refer to "(2-c) Bi-D adjustment pattern （ When Print2 is selected ）
" p.5-45
Bi-D 320 VSD1 Bi-D Adjustment confirmation pattern of 320cps, VSD1, and PG LOW/HIGH
value
Bi-D 320 VSD3 Bi-D Adjustment confirmation pattern of 320cps, VSD3, and PG LOW/HIGH
value
Bi-D 320 VSD4 Bi-D Adjustment confirmation pattern of 320cps, VSD4, and PG LOW/HIGH
value
Bi-D 400 VSD1 Bi-D Adjustment confirmation pattern of 400cps, VSD1, and PG LOW/HIGH
value
Bi-D 400 VSD3 Bi-D Adjustment confirmation pattern of 400cps, VSD3, and PG LOW/HIGH
value
Bi-D 400 VSD4 Bi-D Adjustment confirmation pattern of 400cps, VSD3, and PG LOW/HIGH
value
㧭㨐㨖ޓ㧢㧦㨁㨚㨕㧛㧮㨕ޓ㧸㨛㨣
㧯㨔㨑㨏㨗ޓ㧠㧦㧭㨐㨖㨡㨟㨠㨙㨑㨚㨠
㧸㨛㨣㧝㧟㧦㧮㨕㧰ޓ㧭㧸㧸
Set Paper
Finish printing
Change to PG_Low
Select Low or High
Select Print3 or Setup
If Head height is not Low
Print adjustment pattern
If media is not set
If the temperature of the pre-heater is below 47 ͠
and platen heater is below 42 C
* Pressing [Cancel] key stops control and start printing
㧮㨕㧰ޓ㧭㧸㧸ޓޓޓޓޓޓ㧦㧼㨞㨕㨚㨠㧟
㧯㨔㨍㨚㨓㨑ޓ㧴㨑㨍㨐ޓ㧳㨍㨜ޓ㧸㨛㨣
㧿㨑㨠ޓ㧼㨍㨜㨑㨞
㧭㨐㨖㨡㨟㨠㨙㨑㨚㨠㧼㨞㨕㨚㨠
㨃㨍㨞㨙㨕㨚㨓㨁㨜㧦㧼㨞㨑ޓޓޓ㧟㧤ࠑ㧯