manualshive.com logo in svg

MUTOH ValueJet VJ-1324, Maintenance Manual, Page: 232 / 439

Share
Download
MUTOH ValueJet VJ-1324 Maintenance Manual Download Page 232

3.10.2 Replacing  P_REAR Sensor

P.3-150

3.10 Replacement of Frame Section Components

VJ1324E-M-02

3.10.2

Replacing  P_REAR Sensor

T I P

Replacing Procedure For Maintenance Part: P_REAR sensor Assy
This part will be referred to as the P_REAR sensor in this manual.

1.

 Remove Paper Guide  R2.

"3.2.7 Removing Paper Guide R2" p.3-17

2.

Remove Connector of P_REAR Sensor from MAIN board Assy.

3.

Remove P_REAR Sensor from Clamps on the path.

4.

Remove screw (1 piece) retaining PE Sensor plate to Frame.

5.

Remove the screw (2 pieces) retaining P_REAR sensor on PE sensor plate.

6.

Remove P_REAR Sensor.

7.

To reassemble unit, reverse the removal procedure.

8.

Perform various adjustments.

"4.2 Adjustment Item" p.4-2

No.

Name

1

P_REAR Sensor

2

Tapping screwM3

×

6 S Tight cup 

3

PE Sensor plate

4

Clamp

1

2

3

4

No.

Name

1

Cup screw M2 

×

 6

2

P_REAR Sensor

3

PE sensor plate

1

2

3

Summary of Contents for ValueJet VJ-1324
























































































































































































































































































































































































































































Reviews:

No comments