MUTOH ValueJet VJ-1324 Maintenance Manual Download Page 71

Page: 71 / 439

2.3 Troubleshooting Without Error Messages

VJ1324E-M-02

2.3.4 Noise Problems

P.2-57

2.3.4

Noise Problems

Table 2-9 Symptoms, Check Items, and Actions for Noise Problems

No.

Symptoms

Check Item

Action

Reference

Abnormal noise is heard
when media is suctioned.

1. Are there any foreign objects or obstacles around

rotating fin of suction fan Assy ?

Remove obstacles and foreign objects.

"3.10.1 Replacing Adsorption FAN"

p.3-149

2. Check damage of cables and connection of connectors. If damaged, replace damaged part.

―

3. Suction fan Assy may be defective.

Replace suction fan Assy .

"3.10.1 Replacing Adsorption FAN"

p.3-149

4. MAIN board Assy may be malfunctioning.

Replace MAIN board Assy .

"3.4.4 Replacing MAIN Board

Assy" p.3-42

1. Are there any foreign objects or obstacles around

rotating fin of suction fan Assy ?

Remove obstacles and foreign objects.

2. Power board Assy may be defective.

Replace power board Assy .

"3.4.10 Replacing Power Board

Assy" p.3-50

Abnormal noise in
waiting mode

1. Are there any foreign objects or obstacles at noise-

generating position?

Remove obstacles and foreign objects.

―

2. Is abnormal noise heard from board?

Replace applicable one of the following board
assemblies.
•

MAIN board Assy

•

CR board Assy

•

Print head Assy

"3.4.4 Replacing MAIN Board

Assy" p.3-42

"3.7.6 Replacing Print Head" p.3-

106

"3.7.4 Replacing CR Board Assy"

p.3-101

Summary of Contents for ValueJet VJ-1324
















































































































































































































































































































































































































































Search results

Summary of Contents for ValueJet VJ-1324

Reviews:

MUTOH ValueJet VJ-1324, Maintenance Manual, Page: 71 / 439

Search results

Summary of Contents for ValueJet VJ-1324

Reviews: