manualshive.com logo in svg

MUTOH ValueJet VJ-1324, Maintenance Manual, Page: 246 / 439

Share
Download
MUTOH ValueJet VJ-1324 Maintenance Manual Download Page 246

3.13.2 Removing Take-Up Unit

P.3-164

3.13 Replacing Take-Up Unit (Option)

VJ1324E-M-02

3.13.2 Removing Take-Up Unit 

CAUTION

When replacing take-up unit, unplug the AC inlet cable and leave it for a while before 
operation.
If operating while the AC inlet is still plugged in, standby electricity may give an 
electrical shock to the operator.

1.

Remove take-up scroller.

2.

Remove tension arm.

"3.13.1 Removing Tension Arm" p.3-162

3.

Remove the screws (4 pieces) retaining take-up unit fixing plate on the origin side.

4.

Remove take-up unit fixing plate.

5.

Remove the screws (4 pieces) retaining adjuster mounting plate.

6.

Remove adjuster mounting plate.

7.

Remove take-up unit.

8.

To reassemble the unit, reverse the removal procedure.

No.

Name

1

Take-up fixing bracket

2

Take-up unit fixing plate screw (hexagon socket head bolt M4

 × 

10)

3

Take-up unit fixing plate

1

2

3

2

2

No.

Name

1

Adjuster mounting plate

2

Adjustment mounting plate screw (hexagon socket head bolt M4

 

× 

10)

3

Take-up unit

1

2

Summary of Contents for ValueJet VJ-1324
























































































































































































































































































































































































































































Reviews:

No comments