manualshive.com logo in svg

MUTOH ValueJet VJ-1324, Maintenance Manual, Page: 234 / 439

Share
Download
MUTOH ValueJet VJ-1324 Maintenance Manual Download Page 234

3.11.1 Replacing Tube Fixing Clamp

P.3-152

3.11 Replacing Cable Guide Section Components

VJ1324E-M-02

3.11 Replacing Cable Guide Section 

Components

3.11.1

Replacing Tube Fixing Clamp

T I P

Replacing Procedure For Maintenance Part: Tube Fixing Clamp Assy.
This part will be referred to as the Tube Fixing Clamp in this manual.

1.

Remove Front Cover.

"3.2.4 Removing Front Cover and Replacing Front Cover Holder" p.3-13

2.

Remove Top Cover.

"3.2.6 Removing Top Cover" p.3-16

3.

Remove tube fixing clamp.

4.

Replace tube fixing clamp.

5.

To reassemble unit, reverse the removal procedure.

NOTE

Install the tube fixing clamp so that the part of open turn in front of the printer.

No.

Name

1

tube fixing clamp

1

Summary of Contents for ValueJet VJ-1324
























































































































































































































































































































































































































































Reviews:

No comments