MUTOH ValueJet VJ-1324, Maintenance Manual, Page: 221 / 439

3.8.1 Replacing Maintenance Assy P.3-139
3.8 Replacing Maintenance Section VJ1324E-M-02
9.
Remove the connector of waste fluid sensor relay Assy from waste fluid sensor
.
10. Remove waste fluid sensor relay Assy from the clamp on the path and remove from the Hole of
maintenance base.
11. Remove the tube of pump cap Assy from waste fluid guide 2
。
12. Remove Panel_FFC from Clamp.
13. Remove the screws (2 pieces) retaining the front and rear sides of maintenance Assy .
ｖ
14. Remove Maintenance Base 2 （ with Maintenance Assy mounted) from Printer MAIN body.
No. Name
1
Connector
2 Waste Fluid Sensor Cable Assy
3
Waste Fluid Sensor
No. Name
1 Clamp
1
2
3
1
5
3
4
6
2
2
Waste Fluid Sensor Cable Assy
3
Hole of Maintenance base
4
Maintenance base
5
Tube
6
Waste fluid guide 2
No. Name
1
Clamp
2
FFC
3
Tapping screwM3
×
6 S Tight cup
）
4
Maintenance Base 2
3
1
2
4
3