MUTOH ValueJet VJ-1324 Maintenance Manual Download Page 10

Page: 10 / 439

Revision History

P.4

Revision History

VJ1324E-M-02

misdescription

5.2.1

Modify the descriptions in NOTE.

P5-3

changing

specifications

5.3.2

Add S/C Log to Test Print Menu.

P5-5

5.3.2

Add Cut Function to Media Feed Menu.

P5.5

5.5.9

Add Initiallizing S/C Log to Record Menu.

P5-18

5.5.10

Modify the descriptions in NOTE.

P5-24

5.7

Add Bi-D Copy to Adjustment Menu.

P5-28

5.8.5

Modify the printing speed in Uni-D/Bi-D
Adjustment Menu.

P5-42~49

5.8.8

Add S/C Log info to Test Printing Menu.

P5-51

5.8.8

Modify the Sample printings in TIP.

P5-52

5.10

Add S/C Log info to Sample printing Menu.

P5-58

5.11.2

Modify the Items and contents.

P5-63

5.12

Modify the items in Servo Settine Menu.

P5-69

5.13

Add Choke Valve endurance Menu.

P5-70

5.13.1

Modify Carriage speed.

P5-71

misdescription

5.13

Modify the TIP.

P5-73~78

misdescription

7.4.1

Modify the Remarks in the 11 of Table 7-3.

P7-6

changing

specifications

7.4.1

Add Solenoid Head Washing Kit to the Tools for
Adjustment.

P7-6

misdescription

8.2.3

Modify the color of Status Lamp in the 9 of table
(2).

P8-6

misdescription

8.3.2

Modify illustration in (2)..

P8-8

changing

specifications

8.3.3

Add length changing function.

misdescription

10.2

Modify the contents of Platen Heater (100)

P10-7

Revising

ALL

Header,Footer

VJ1324-M-02

→

VJ1324-M-03

Revising

4.2,4.3

VJ1324-M-02 or later to VJ1324-M-03 or later

P4-2,P4-4

Omitted

5.5

Add “S/C LogInit” to the contents in “Record”

P5-7

Omitted

5.5.9

Add “S/C LogInit”

P5-18

Revison

Reason

Chapter

Section

Contents

Page No.

Errata

Remarks

Summary of Contents for ValueJet VJ-1324
















































































































































































































































































































































































































































Search results

Summary of Contents for ValueJet VJ-1324

Reviews:

MUTOH ValueJet VJ-1324, Maintenance Manual, Page: 10 / 439

Search results

Summary of Contents for ValueJet VJ-1324

Reviews: