manualshive.com logo in svg

MUTOH ValueJet VJ-1324, Maintenance Manual, Page: 256 / 439

Share
Download
MUTOH ValueJet VJ-1324 Maintenance Manual Download Page 256

3.13.5 Replacing Take-Up Unit Control Board Assy

P.3-174

3.13 Replacing Take-Up Unit (Option)

VJ1324E-M-02

(5) Replacing DC Cable Assy 

1. Remove take-up scroller.

2.

Remove tension arm.

"3.13.1 Removing Tension Arm" p.3-162

3.

Remove take-up unit.

"3.13.2 Removing Take-Up Unit" p.3-164

4.

Remove board chassis.

"(1) Removing Board Chassis" p.3-169

 of 

"3.13.5 Replacing Take-Up Unit Control 

Board Assy" p.3-169

5.

Remove DC cable Assy from the connector on take-up control board Assy.

6.

Remove DC cable Assy from the connector on power board Assy.

7.

Replace DC cable Assy.

8.

To reassemble the unit, reverse the removal procedure.

No.

Name

1

Take-up control board Assy 

2

DC cable Assy 

1

2

No.

Name

1

Power board Assy 

2

DC cable Assy 

1

2

Summary of Contents for ValueJet VJ-1324
























































































































































































































































































































































































































































Reviews:

No comments