manualshive.com logo in svg

MUTOH ValueJet VJ-1324, Maintenance Manual, Page: 98 / 439

Share
Download
MUTOH ValueJet VJ-1324 Maintenance Manual Download Page 98

3.2.6 Removing Top Cover

P.3-16

3.2 Removing Covers

VJ1324E-M-02

3.2.6

 Removing Top  Cover

1.

Remove Front Cover.

"3.2.4 Removing Front Cover and Replacing Front Cover Holder" p.3-13

2.

 

Remove the screw (2 pieces) retaining the front side of top cover.

3.

 

Remove the screws (7 pieces) retaining the rear side of top cover.

4.

Remove Top  Cover.

5.

To reassemble unit, reverse the removal procedure.

No.

Name

1

 Top  Cover 

2

Pan-head screw with spring washer and flat washerM3

 × 

5

2

1

2

2

2

1

2

No.

Name

1

 Top  Cover 

2

Pan-head screw with spring washer and flat washerM3

 × 

5

Summary of Contents for ValueJet VJ-1324
























































































































































































































































































































































































































































Reviews:

No comments