MUTOH ValueJet VJ-1324, Maintenance Manual, Page: 196 / 439

3.7.7 Replacing Solenoid Head Assy P.3-114
3.7 Replacing Carriage Peripherals VJ1324E-M-02
12. Remove screws (2 pieces) retaining Carriage Weight holder.
13. Remove Carriage Weight holder and Carriage Weight.
14. Remove Solenoid Head Assy from Print head.
"3.7.6 Replacing Print Head" p.3-106
CAUTION
• Do not hold the transparent films on the sides of Solenoid head Assy.The ink
inside of Solenoid head Assy is discharged.
• Do not damage the transparent films on the sides of Solenoid head Assy.
• To avoid leakage of the remaining ink, place a waste cloth under the removed
Solenoid head Assy or put Solenoid head Assy into a plastic bag.
15. Refer to the Note of the step 20 in this section to mark on Ink tube (K, C, Y, M etc).
16. Remove the O-ring (1 piece) from Ink tube.
17. Install a new O-ring around the tip of Ink tube.
18. Push the O-ring with Connector Solenoid head to connect the joint screw and Connector Solenoid
head.
No. Name
1
Pan-head screw with spring washer and flat washerpolished M3
×
10
2
Carriage Weight holder
、
Carriage weight
1
1
2
No. Name
1 Ink tube
2
O ring （ M6 ）
3 Joint screw
No. Name
1 Connector Solenoid head
2
O ring （ M6 ）
3 Joint screw
1
2
3
1
2
3