manualshive.com logo in svg

MUTOH ValueJet VJ-1324, Maintenance Manual, Page: 28 / 439

Share
Download
MUTOH ValueJet VJ-1324 Maintenance Manual Download Page 28

2.2 Troubleshooting with Error Messages

VJ1324E-M-02

2.2.2 Errors with Message

P.2-14

NOTE

• The square bracket pair in an error message indicates the applicable ink color.
• If no ink and no cartridge occur at the same time, no cartridge message has priority to be displayed.

6

Life  Times 
[Head]

The operational 
life of Print head 
has almost 
expired.

Check the condition of Head.

Replace Head as necessary. Clear the counter after 
replacing it.

"3.7.6 Replacing Print Head" 

p.3-106

7

Life  Times  [PF 
Motor]

The operational 
life of PF motor 
has almost 
expired.

The operational life of PF motor has almost expired.

Replace PF motor as necessary.

 

 

Clear the counter after 

replacing it.

"3.5.1 Replace PF Motor Assy" 

p.3-61

8

Life Times [CR 
Motor]

The operational 
life of CR motor 
has almost 
expired.

Check the condition of CR motor.

Replace CR motor as necessary. Clear the counter 
after replacing it.

"3.6.1 Replacing CR Motor 

Assy" p.3-86

9

Life  Times 
[Pump]

The operational 
life of Pump has 
almost expired.

Check the condition of Pump.

Replace Pump as necessary. Clear the counter after 
replacing it.

"3.8.1 Replacing Maintenance 

Assy" p.3-138

No.

Message

Event/

symptom

Check item

Action

Reference

Summary of Contents for ValueJet VJ-1324
























































































































































































































































































































































































































































Reviews:

No comments