manualshive.com logo in svg

MUTOH ValueJet VJ-1324, Maintenance Manual, Page: 121 / 439

Share
Download
MUTOH ValueJet VJ-1324 Maintenance Manual Download Page 121

3.4.3 Removing MAIN Board Bracket

P.3-39

3.4 Replacing Board Base

VJ1324E-M-02

3.4.3

Removing MAIN Board Bracket

1.

 Remove Paper Guide  R2.

"3.2.7 Removing Paper Guide R2" p.3-17

2.

Remove connector Panel.

"3.4.1 Removing Connector Panel" p.3-37

　

3.

Remove the screws (3pieces) retaining Cooling FAN Bracket.

4.

Remove Cooling FAN Bracket.

5.

Remove the Cables from Clamps on the MAIN Board Bracket.

6.

Remove the Cables from MAIN Board Assy.

CAUTION

• Before replacing Board Assy and pulling or pushing FFC type cables, unplug 

Power cable and leave it for a while.
If operating with Power cable still plugged, Board may be damaged or operators 
may get an electric shock by residual electric charge.

• When you handle Circuit board, do not touch any elements on it with bare hands.

Doing so may cause electrostatic discharge and damage the elements.

• Before plugging FFC, check the condition of FFC terminals (that the corners of 

the terminals are not crooked and reinforcing plate is not peeled).

• Plug/unplug FFC perpendicularly to the connector.  Never plug/unplug it 

obliquely. If plugged obliquely, it may damage/shorten/break terminals in 
connectors, causing a breakdown of on-board devices.

• Make sure to plug FFC all the way in the connector. After plugging it, make sure 

that FFC and the connector terminals are not misaligned sideways and that FFC 
is not plugged obliquely.

No.

Name

1

Cooling FAN Bracket

2

Tapping screwM3

×

6 S Tight cup 

2

1

2

No.

Name

1

Clamp

2

MAIN Board Bracket

1

2

Summary of Contents for ValueJet VJ-1324
























































































































































































































































































































































































































































Reviews:

No comments