MUTOH ValueJet VJ-1324, Maintenance Manual, Page: 314 / 439

5.5.12 Time Check Menu P.5-28
5.7 Adjustment Menu VJ1324E-M-02
5.7 Adjustment Menu
This menu is used to align the printing position and correct the media feed operation.
When replacing Head, perform head wash (after this, turn off the power and replace Head), head
nozzle check,UniD adjustment
、 BiD adjustment 、 Side margin adjustment 、 Test pattern printing.
Table 5-3 Diagnosis Items in Adjustment Menu
Diagnosis item Contents Reference
Rear ／ Edge
Sensor adjustment
Automatically adjusts the sensor sensitivity for
Media detection.
"5.7.1 Rear/ Edge
Sensor Adjustment"
p.5-30
CR Return Position Adjusting CR Return position.
"5.7.2 CR Return
Position adjustment"
p.5-32
Head nozzle check Checks whether the ink is normally discharged
from Head nozzles from the printing results.
"5.7.3 Head
Nozzle Check Menu"
p.5-33
Skew check Performs media feed and detects the degree of
skew in media feed by Sensor.
"5.7.4 Skew
Check Menu" p.5-36
Head slant check Checks Print head slant (horizontal and vertical
direction) from the printing results. Mechanical
adjustment must be performed as necessary.
"5.7.5 Head Slant
Check Menu" p.5-37
Uni-D / Bi-D
adjustment Low When PG_Low, performs adjustments of gaps
between the nozzle rows and aligns the position in
bi-directional printing.
"5.7.6 Uni-D/Bi-D
Adjustment Menu"
p.5-42
Bi-D Copy Copy All adjustment values form Bi-D Low to Bi-
D High.
(When Copying adjustment values, which are
adjusted for Bi-D High.)
"5.7.7 Bi-D Copy"
p.5-49
Uni-D / Bi-D
adjustment High When PG_High, performs adjustments of gaps
between the nozzle rows and aligns the position in
bi-directional printing.
"5.7.6 Uni-D/Bi-D
Adjustment Menu"
p.5-42
Top & Bottom
adjustment Adjusts Top, bottom, and side margins.
"5.7.8
Top&Bottom
adjustment Menu"
p.5-50
Test printing Prints out adjustment pattern ALL, adjustment
parameters ALL, and serious error history.
"5.7.9 Test
Printing Menu" p.5-51
Longstore Cleans Ink tubes and Print heads using Cleaning
liquid.
"5.7.10 Longstore
Menu" p.5-53
Software counter
initialization Clears various software counters.
"5.7.11 Software
Counter Initialization
Menu" p.5-54
Feed amount check Checks whether there is an error in feed amount
per band from the printing results.
"5.7.12 Feed Pitch
Check Menu" p.5-55
Solid print check Performs solid nozzle print check (color selection,
nozzle selection and print direction selection are
available).
"5.7.13 Solid Print
Menu" p.5-56
Table 5-3 Diagnosis Items in Adjustment Menu (Continued)
Diagnosis item Contents Reference