manualshive.com logo in svg

MUTOH ValueJet VJ-1324, Maintenance Manual, Page: 280 / 439

Share
Download
MUTOH ValueJet VJ-1324 Maintenance Manual Download Page 280

4.9.2 Adjustment Procedure

P.4-17

4.9 Head Height Adjustment

VJ1324E-M-02

7.

If the carriage does not pass through the gap of 1.1mm and pass through 1.3mm, 
readjust PG height by moving two height adjust cams on both left and right of 

carriage.

1.1mm.

• To raise head height: Rotate cam upward.
• To lower head height: Rotate cam downward.

NOTE

The left and right cams change the height separately. Make sure to follow the 

steps 3 to 6 and check both left and right of the head height is proper by using 

PG height adjusting jigs.

8.

Apply adhesion bond to the height adjustment cam and fix the height.

9.

To reassemble the unit, reverse the removal procedure.

No.

Name

1

Height adjustment cam

2

Carriage

1

2

Summary of Contents for ValueJet VJ-1324
























































































































































































































































































































































































































































Reviews:

No comments