manualshive.com logo in svg

MUTOH ValueJet VJ-1324, Maintenance Manual, Page: 243 / 439

Share
Download
MUTOH ValueJet VJ-1324 Maintenance Manual Download Page 243

3.12.1 Replacing Waste Fluid Level Switch ,Waste Fluid Bottle Assy

P.3-161

3.12 Replacing Accessory Unit

VJ1324E-M-02

3.12 Replacing Accessory Unit

3.12.1

Replacing Waste Fluid Level Switch ,Waste Fluid Bottle 
Assy

T I P

Replacing Procedure For Maintenance Part: Waste Fluid Level Switch (VJ16) and Waste Fluid Bottle 
Assy.
This part will be referred to as the Waste Fluid Switch and Waste Fluid Bottle Assy in this manual.

NOTE

• Discharge the waste fluid fully to replace Waste fluid bottle.
• Confirm that there remains no waste fluid in the waste fluid tube.

1. Remove waste fluid level switch from connector.

2.

Remove Waste fluid tube.

3.

Loosen Cap of Waste fluid bottle.

4.

Loosen the nut of Waste fluid level switch.

5.

 Pull out the nut of Waste fluid level switch and Waste fluid bottle cap from Waste fluid bottle.

6.

Replace Waste fluid bottle.

7.

Replace Waste Fluid Level switch.

8.

To reassemble unit, reverse the removal procedure.

No.

Name

1

Waste fluid level switch 

2

Connector

1

2

No.

Name

1

Waste fluid bottle

2

Waste fluid tube

3

Cap of Waste fluid bottle

4

Nut of Waste Fluid Level switch

No.

Name

1

Cap of Waste fluid bottle

2

Nut of Waste fluid level switch

1

2

3

4

1

2

Summary of Contents for ValueJet VJ-1324
























































































































































































































































































































































































































































Reviews:

No comments