manualshive.com logo in svg

MUTOH ValueJet VJ-1324, Maintenance Manual, Page: 259 / 439

Share
Download
MUTOH ValueJet VJ-1324 Maintenance Manual Download Page 259

3.13.6 Replacing Take-Up ON Sensor and Take-Up OFF Sensor

P.3-177

3.13 Replacing Take-Up Unit (Option)

VJ1324E-M-02

(2) Replacing Take-Up ON Sensor and Take-Up OFF Sensor

This section describes the procedure to replace take-up ON sensor and take-up OFF sensor 
(Maintenance number: DF-49471, Maintenance part name: CR_HP sensor, Lever sensor).

1.

Remove take-up scroller.

2.

Remove tension arm.

"3.13.1 Removing Tension Arm" p.3-162

3.

Remove the screws (2 pieces) retaining sensor mounting plate on the right of inside chassis.

4.

Remove take-up ON sensor relay Assy and take-up OFF sensor relay Assy from 
take-up ON sensor and take-up OFF sensor.

No.

Name

1

Sensor mounting plate

2

pan-head screw with spring washer and flat washer polished M3 

×

 6

3

Right of inside chassis

3

1

2

㧔⢛㕙㧕

No.

Name

1

Take-up ON sensor

2

Take-up OFF sensor

3

Take-up ON sensor relay Assy 

4

Take-up OFF sensor relay Assy 

1

1

2

Summary of Contents for ValueJet VJ-1324
























































































































































































































































































































































































































































Reviews:

No comments