MUTOH ValueJet VJ-1324 Maintenance Manual Download Page 77

Page: 77 / 439

2.3 Troubleshooting Without Error Messages

VJ1324E-M-02

2.3.6 Online Function Problems

P.2-63

2.3.6

Online Function Problem

Table 2-11 Symptoms, Check Items, and Actions

No.

Symptoms

Check Item

Action

Reference

Other functions do not work
correctly

MAIN board Assy may be damaged.

Replace MAIN board Assy .

"3.4.4 Replacing MAIN Board

Assy" p.3-42

Printing position is incorrect

Is there a problem with CW adjustment?

Perform adjustment.

"5.7.6 Uni-D/Bi-D Adjustment

Menu" p.5-42

Is there a problem with P_Edge sensor adjustment?

Perform adjustment.

"3.7.16 Replacing P_EDGE Sensor

Assy" p.3-135

Is P_Edge sensor correctly connected?

Connect it.

P_Edge sensor may be damaged.

Replace P_Edge sensor.

MAIN board Assy may be damaged.

Replace MAIN board Assy .

"3.4.4 Replacing MAIN Board

Assy" p.3-42

Part of the data is not printed
(missing)

Firmware on the Main side may be faulty.

Upgrade Firmware on the Main side.

"4.3 Working with MUTOH Service

Assistance Software" p.4-4

Check if T fence is dirty or twisted.

• When there is grease or dust on it: Wipe it with a dry

cloth.

• When there is ink on it:

Damp a cloth with mild

detergent and lightly wipe off the ink.

• When it is too dirty and the adhered substance

cannot be removed:

Replace T fence.

"3.6.7 Replacing T Fence, T Fence

Spring Assy" p.3-93

Check “Encoder: CR” in “Check3: Test” – “Test5: Encoder” in
the self-diagnosis function.

• If NG, check the connection of the connector of CR

board Assy .

• Replace T fence.
• Replace CR motor Assy .
• Replace CR board Assy
• Replace CR_FFC.

"3.4.4 Replacing MAIN Board

Assy" p.3-42

"3.6.7 Replacing T Fence, T Fence

Spring Assy" p.3-93

"3.11.3 Replacing CR_FFC" p.3-

154

"3.6.1 Replacing CR Motor Assy"

p.3-86

"3.7.4 Replacing CR Board Assy"

p.3-101

Main board Assy may be malfunctioned.

Replace MAIN board Assy .

"3.4.4 Replacing MAIN Board

Assy" p.3-42

Some data or printing

results get garbled.

Main board Assy may be malfunctioned.

Replace MAIN board Assy .

"3.4.4 Replacing MAIN Board

Assy" p.3-42

Summary of Contents for ValueJet VJ-1324
















































































































































































































































































































































































































































Search results

Summary of Contents for ValueJet VJ-1324

Reviews:

MUTOH ValueJet VJ-1324, Maintenance Manual, Page: 77 / 439

Search results

Summary of Contents for ValueJet VJ-1324

Reviews: