MUTOH ValueJet VJ-1324 Maintenance Manual Download Page 146

Page: 146 / 439

3.5.2 Replacing PF Motor Relay Assy

P.3-64

3.5 Replacement of PF Driving Section Components

VJ1324E-M-02

3.5.2

Replacing PF Motor Relay Assy

T I P

• Replacing Procedure For Maintenance Part:PF motor relay A0 Assy.

This part will be referred to as the PF motor relay Assy in this manual.

Remove Side Cover L.

"3.2.3 Removing Side Cover L and Replacing Maintenance Cover Holder" p.3-11

Remove Paper Guide R2.

"3.2.7 Removing Paper Guide R2" p.3-17

Remove PF motor relay Assy connector (white) from MAIN board Assy (J12).
(PF motor relay Assy is a stranded wire of red and black)

Remove PF Motor relay Assy from clamps on the Path.

Remove Connector of PF Motor Relay Assy from Connector of PF Motor Assy.

Replace PF Motor relay Assy.

To reassemble unit, reverse the removal procedure.

No.

Name

Connector of PF motor relay Assy

MAIN Board Assy

No.

Name

Connector of PF Motor Assy

Connector of PF Motor relay Assy

Summary of Contents for ValueJet VJ-1324
















































































































































































































































































































































































































































Search results

Summary of Contents for ValueJet VJ-1324

Reviews:

MUTOH ValueJet VJ-1324, Maintenance Manual, Page: 146 / 439

Search results

Summary of Contents for ValueJet VJ-1324

Reviews: