manualshive.com logo in svg

MUTOH ValueJet VJ-1324, Maintenance Manual, Page: 172 / 439

Share
Download
MUTOH ValueJet VJ-1324 Maintenance Manual Download Page 172

3.6.4 Replacing CR Origin Sensor Cable Assy

P.3-90

3.6 Replacing CR Driving Section Components

VJ1324E-M-02

3.6.4

Replacing CR Origin Sensor Cable Assy

1.

Remove I/H  Cover.

"3.2.1 Removing I/H Cover" p.3-7

2.

Remove Side Cover R.

"3.2.2 Remove Side Cover R" p.3-8

3.

Move the Carriage to the opposite side of origin.

"3.7.1 How To Release Carriage Lock" p.3-98

4.

Remove Connector (White) of CR Origin Sensor Cable Assy from JUNCTION Board Assy.

（

CR Origin Sensor Cable Assy  is a stranded wires of 3 pieces (White

、

Gray

、

Yellow).

"3.4.11 Replacing JUNCTION Board Assy" p.3-51

5.

Remove CR Origin Sensor Cable Assy from clamps on the Path.

　

6.

Replace CR Origin Sensor Cable Assy.

7.

To reassemble the unit, reverse the removal procedure.

No.

Name

1

CR Origin Sensor Cable Assy  

2

Clamp

2

1

Summary of Contents for ValueJet VJ-1324
























































































































































































































































































































































































































































Reviews:

No comments