manualshive.com logo in svg

MUTOH ValueJet VJ-1324, Maintenance Manual, Page: 225 / 439

Share
Download
MUTOH ValueJet VJ-1324 Maintenance Manual Download Page 225

3.8.4 Replacing Waste Fluid  Sensor Cable Assy

P.3-143

3.8 Replacing Maintenance Section

VJ1324E-M-02

3.8.4

 Replacing Waste Fluid  Sensor Cable Assy

1.

Remove I/H  Cover.

"3.2.1 Removing I/H Cover" p.3-7

2.

Remove Side Cover R.

"3.2.2 Remove Side Cover R" p.3-8

3.

Remove connector (red) of Waste Fluid Sensor Cable Assy from JUNCTION board Assy

（

J12

）。

（

 Waste Fluid Sensor Cable Assy is a stranded wires of orange,Black.

）

4.

 Remove Waste Fluid Sensor Cable Assy from clamps (6 pieces) on the path.

5.

Remove Waste Fluid Sensor Cable Assy from  Waste Fluid Sensor.

6.

Replace  Waste Fluid Sensor Cable Assy.

7.

To reassemble the unit, reverse the removal procedure.

No.

Name

1

Waste Fluid Sensor Cable Assy

2

MAIN board Assy

1

2

No.

Name

1

Connector

2

 Waste Fluid Sensor Cable Assy

3

 Waste Fluid Sensor

1

2

3

Summary of Contents for ValueJet VJ-1324
























































































































































































































































































































































































































































Reviews:

No comments