manualshive.com logo in svg

MUTOH ValueJet VJ-1324, Maintenance Manual, Page: 180 / 439

Share
Download
MUTOH ValueJet VJ-1324 Maintenance Manual Download Page 180

3.7.1 How To Release Carriage Lock

P.3-98

3.7 Replacing Carriage Peripherals

VJ1324E-M-02

3.7

Replacing Carriage Peripherals

3.7.1

How To Release Carriage Lock

1.

Open front cover.

2.

Remove Cutter Cap from Cutter Blade.

3.

Push down carriage lock solenoid with hand, and release the lock.

NOTE

• Not to push down the Carriage Lock Solenoid with  Cutter Cap is not removed, Cutter  

might be damaged. 

• For enabling Head lock again, Carriage lock does not need to be moved. Move Carriage 

towards the origin until Carriage is fixed with a sound.

No.

Name

1

Cutter Cap

2

Cutter Blade

3

Carriage Lock Solenoid

1

2

3

Summary of Contents for ValueJet VJ-1324
























































































































































































































































































































































































































































Reviews:

No comments