manualshive.com logo in svg

MUTOH ValueJet VJ-1324, Maintenance Manual, Page: 125 / 439

Share
Download
MUTOH ValueJet VJ-1324 Maintenance Manual Download Page 125

3.4.5 Replacing SODIMM

P.3-43

3.4 Replacing Board Base

VJ1324E-M-02

3.4.5

Replacing SODIMM

T I P

Replacing Procedure For Maintenance Part:SODIMM 128M Assy.
This part will be referred to as the SODIMM in this manual.

 

CAUTION

When handling boards, do NOT touch the elements on the boards.
Elements may be destroyed by static electricity. 

1.

 Remove Paper Guide  R2.

"3.2.7 Removing Paper Guide R2" p.3-17

2.

Remove connector Panel.

"3.4.1 Removing Connector Panel" p.3-37

3.

Unlock the blue locks placed on the both sides of SODIMM.

4.

Replace SODIMM.

5.

To reassemble the unit, reverse the removal procedure.

No.

Name

1

SODIMM

2

MAIN Board Assy

1

2

Summary of Contents for ValueJet VJ-1324
























































































































































































































































































































































































































































Reviews:

No comments