MUTOH ValueJet VJ-1324 Maintenance Manual Download Page 191

Page: 191 / 439

3.7.6 Replacing Print Head

P.3-109

3.7 Replacing Carriage Peripherals

VJ1324E-M-02

21. Adjust so that Head guide leaf spring is horizontal.

22. Make sure that the notch of Head adjustment cam is raised to the top.

"8. Raise the notch of Head adjustment cam to the top." p.3-107

23. Adjust the fixing position of Print head.

24. Tighten the screws retaining Head base and Head mounting plate.

25. Replace the old head rank sticker with a new head rank sticker.

26. To reassemble unit, reverse the removal procedure.

27. Perform various adjustment.

"4.2 Adjustment Item" p.4-2

No.

Name

Head guide leaf spring

No.

Name

Print head

Head mounting plate

Insert a slotted
screwdriver to adjust.

Insert a slotted screwdriver
to push Print head in.

Adjust so that the circular
hole is positioned in front
of the slotted hole.

No.

Name

Pan-head screw with spring washer and flat washerM3

Head base

Head mounting plate

*GCFTCPMUVKEMGT

Summary of Contents for ValueJet VJ-1324
















































































































































































































































































































































































































































Search results

Summary of Contents for ValueJet VJ-1324

Reviews:

MUTOH ValueJet VJ-1324, Maintenance Manual, Page: 191 / 439

Search results

Summary of Contents for ValueJet VJ-1324

Reviews: