MUTOH ValueJet VJ-1324 Maintenance Manual Download Page 179

Page: 179 / 439

3.6.9 Replacing Pressure roller Arm Assy

P.3-97

3.6 Replacing CR Driving Section Components

VJ1324E-M-02

3.6.9

Replacing Pressure roller Arm Assy

This section describes Pressure Roller Assy, Pressure Roller Axis Assy, Pressure Roller Spring and
Presure Arm Assy.

(1) Replacing Pressure roller Spring

Remove Paper Guide R2.

"3.2.7 Removing Paper Guide R2" p.3-17

Remove the pressure Roller spring using longnose pliers, etc.

Replace Pressure Roller Spring.

To reassemble the unit, reverse the removal procedure.

(2) Replace Pressure Roller Arm Assy

Remove Pressure Arm Spring Assy (2 pieces) retaining Pressure Roller Arm Assy.

"(1) Replacing Pressure roller Spring" p.3-97

Remove Pressure Roller Arm Assy.

Remove Pressure Roller Assy from removed Pressure Roller Arm Assy.

Replace Pressure Roller Arm Assy.

To reassemble the unit, reverse the removal procedure.

NOTE

If the upper spring comes off, attach it from the front side

(3) Pressure Roller Assy

、

Pressure Roller Axis Assy

Refer to Exploded View for Components of Pressure Roller Assy

、

Pressure Roller Axis Assy.

Exploded View

Remove

pressure Roller spring

(2 pieces

）

"(1) Replacing Pressure roller Spring" p.3-97

Remove Pressure Roller Assy and Pressure Roller Axis Assy from Pressure Roller Arm Assy.

"(2) Replace Pressure Roller Arm Assy" p.3-97

Replace Pressure Roller Assy and Pressure Roller Axis Assy.

To reassemble the unit, reverse the removal procedure.

No.

Name

Pressure Roller Arm Assy

Pressure Roller Spring

No.

Name

Pressure Roller Arm Assy

Pressure Roller Assy

Summary of Contents for ValueJet VJ-1324
















































































































































































































































































































































































































































Search results

Summary of Contents for ValueJet VJ-1324

Reviews:

MUTOH ValueJet VJ-1324, Maintenance Manual, Page: 179 / 439

Search results

Summary of Contents for ValueJet VJ-1324

Reviews: