MUTOH ValueJet VJ-1324, Maintenance Manual, Page: 29 / 439

2.2 Troubleshooting with Error Messages VJ1324E-M-02
2.2.3 Errors Requiring Reboot P.2-15
2.2.3 Errors Requiring Reboot
This section describes the contents of reboot-requiring errors as well as the check items and recovery actions.
These errors are issued when any of the following critical problems occur.
•
Obstacle that prevents the machine's operation
• Damage of electric circuits (Boards, Motors, Sensors)
• Abnormal operation of control programs
When any of the above conditions occur, the machine follows the steps shown below before stopping its operation.
1. Turn OFF the driving system power automatically.
2. Flash all lamps on Operation panel and generate intermittent audible alarm.
3. Display the applicable error message on the LCD.
The error can be cancelled by removing the error causes and restarting the machine.
(1) CPU system serious error
No. Message Event/
symptom
Check item Action Reference
1 E 016Interrupt
［
00
］
Interruption
exception error:
An anomaly is
detected during
interruption
process. 1. Check AC power supply and printer peripherals.
2. Check whether the same error occurs. Even when there is no
problem, turn off the printer and turn it back on a few times to
check.
3. Check the serial number of the printer.
4. MAIN board Assy may be damaged.
• Replace MAIN board Assy . Operation Manual
"3.4.4 Replacing MAIN Board
Assy" p.3-42
2 E016 TLB Modif
[01] Command border
exception/TLB
exception (load or
command fetch)
error:
An anomaly is
detected in
command border.
Or TLB exception
is detected while
loading data or
fetching data.