MUTOH ValueJet VJ-1324 Maintenance Manual Download Page 340

Page: 340 / 439

5.7.11 Software Counter Initialization Menu

P.5-54

5.7 Adjustment Menu

VJ1324E-M-02

5.7.11

Software Counter Initialization Menu

This menu is used to initialize various software counters.

NOTE

The counters are initialized before delivery. Do not initialize them during
maintenance.

The software counters that can be initialized through this menu are as follows.

Pressing [Enter] key on Operation panel in the “Counter Reset?” screen performs the software counter
initialization.

Counters to be initialized

Initial

value

Cumulative print timer

Ink consumption counter

Ink amount count in the cap

Waste ink count

User not-filled flag

Not-filled flag

User First Start up flag

Coynter for plugging/ un plugging 1L adapter

After few minutes

='PVGT?

㧯㨛㨡㨚㨠㨑㨞ޓ㧾㨑㨟㨑㨠㧫

㧭㨐㨖㧚㧝㧞㧦㧯㨛㨡㨚㨠㧯㨘㨑㨍㨞

㧯㨔㨑㨏㨗ޓ㧠㧦㧭㨐㨖㨡㨟㨠㨙㨑㨚㨠

㨃㨍㨕㨠ޓ㧸㨕㨠㨠㨘㨑ޓ㨀㨕㨙㨑

㧭㨐㨖㧚㧝㧞㧦㧯㨛㨡㨚㨠㧯㨘㨑㨍㨞

Summary of Contents for ValueJet VJ-1324
















































































































































































































































































































































































































































Search results

Summary of Contents for ValueJet VJ-1324

Reviews:

MUTOH ValueJet VJ-1324, Maintenance Manual, Page: 340 / 439

Search results

Summary of Contents for ValueJet VJ-1324

Reviews: