MUTOH ValueJet VJ-1324 Maintenance Manual Download Page 240

Page: 240 / 439

3.11.4 Replace Valve Solenoid (Exploded View CR Assy2)

P.3-158

3.11 Replacing Cable Guide Section Components

VJ1324E-M-02

3.11.4

Replace Valve Solenoid
(Exploded View CR Assy2)

T I P

Replacing Procedure For Maintenance Part: Carriage Lock Solenoid Assy.
This part will be referred to as the Valve Solenoid Assy in this manual.

Remove Front Cover.

"3.2.4 Removing Front Cover and Replacing Front Cover Holder" p.3-13

Remove Top Cover.

"3.2.6 Removing Top Cover" p.3-16

Remove Connector of Valve Solenoid from MAIN Board Assy

（

J31).

T I P

Solenoid Cable is a stranded wires of Red.Connector color is White.

Remove Solenoid Cable from clamps around MAIN board Assy.

No.

Name

Connector of Solenoid Assy

No.

Name

Solenoid Cable

Clamp

Summary of Contents for ValueJet VJ-1324
















































































































































































































































































































































































































































Search results

Summary of Contents for ValueJet VJ-1324

Reviews:

MUTOH ValueJet VJ-1324, Maintenance Manual, Page: 240 / 439

Search results

Summary of Contents for ValueJet VJ-1324

Reviews: