MUTOH ValueJet VJ-1324 Maintenance Manual Download Page 90

Page: 90 / 439

3.2.2 Remove Side Cover R

P.3-8

3.2 Removing Covers

VJ1324E-M-02

3.2.2

Remove Side Cover R

Remove I/H Cover.

"3.2.1 Removing I/H Cover" p.3-7

Move pressure lever to the UP status.

Remove the screw (1 piece) retaining pressure lever cap.

Remove the screws (2 pieces) on the out side of side cover R.

Remove Screws (2 pieces) retaining Waste Fluid Cover.

Remove Waste Fluid Cover.

Open Front Cover.

No.

Name

Pressure lever cap

10, P tight binding

No.

Name

Side Cover

Tapping screw

8, S tight cup

No.

Name

Waste fluid Cover

Tapping screw M3

6 S Tight cup

Summary of Contents for ValueJet VJ-1324
















































































































































































































































































































































































































































Search results

Summary of Contents for ValueJet VJ-1324

Reviews:

MUTOH ValueJet VJ-1324, Maintenance Manual, Page: 90 / 439

Search results

Summary of Contents for ValueJet VJ-1324

Reviews: