manualshive.com logo in svg

MUTOH ValueJet VJ-1324, Maintenance Manual, Page: 161 / 439

Share
Download
MUTOH ValueJet VJ-1324 Maintenance Manual Download Page 161

3.5.6 Replacing Heater Section

P.3-79

3.5 Replacement of PF Driving Section Components

VJ1324E-M-02

(2-c)Replacing Pre Heater, Pre Thermistor

T I P

• Replacing Procedure For Maintenance Part:Platen Heater (100).

This part will be referred to as Pre Heater in this manual.

• Replacing Procedure For Maintenance Part:Thermistor Assy.

This part will be referred to as Pre thermistor in this manual.

NOTE

• Pre Heater is attached to the back side of Paper guide R1.

When replacing Pre Heater, make sure to  remove the Paper guide R1 from Printer.

• When replacing Pre Thermistor, make sure to remove the Paper guide R1 from Printer.
• When replacing Pre Thermistor, replace Pre Heater simultaneously.

1.

Remove Paper guide R2.

"3.2.7 Removing Paper Guide R2" p.3-17

2.

Remove Pre Thermistor from Pre thermistor relay Assy.

"(2-b) Replacing Pre Thermistor relay Assy" p.3-78

3.

Remove the plate that Pre Heater relay Assy is fixed.

"(2-a) Replacing Pre Heater relay Assy" p.3-76

4.

Remove Pre Heater relay Assy from the cable of Pre Heater.

"(2-a) Replacing Pre Heater relay Assy" p.3-76

5.

Remove Cooling Fan Bracket.

"3.4.2 Replacing Cooling FAN 24V Assy (For MAIN Board)" p.3-38

6.

Remove the screw(1 piece) retaining P_REAR sensor.

7.

Remove P_REAR sensor from Paper guide R1.

8.

Remove all clamp that is fixed to paper guide stay a1.

（

With cables fixed.)

1

2

No.

Name

1

P_REAR sensor

2

Tapping screw M3

×

6 S tight cup

No.

Name

1

P_REAR sensor

2

Paper guide R1

No.

Name

1

clamp

2

paper guide stay a1

1

2

1

2

Summary of Contents for ValueJet VJ-1324
























































































































































































































































































































































































































































Reviews:

No comments