manualshive.com logo in svg

MUTOH ValueJet VJ-1324, Maintenance Manual, Page: 323 / 439

Share
Download
MUTOH ValueJet VJ-1324 Maintenance Manual Download Page 323

5.7.5 Head Slant Check Menu

P.5-37

5.7 Adjustment Menu

VJ1324E-M-02

5.7.5

Head Slant Check Menu

This menu is used to check print head slant (horizontal direction, vertical direction) from a sample 
printing. And performs mechanical adjustment if necessary.

The printer has 8 nozzle rows per head. This menu adjusts the slant of each nozzle row evenly.

T I P

• Uni-D (Uni-Direction) indicates uni-directional printing.
• Bi-D (Bi-Direction) indicates bi-directional printing.

The items for head slant is as follows

NOTE

• When printing "Head slant: Slant1" adjustment pattern, the pattern for vertical adjustment 

is also printed.

• You can use the printed "Head slant: Slant2" adjustment pattern to adjust the head slant 

(vertical).

Items

Contents

Head slant slant1

Head slant check in the horizontal direction

Head slant slant2

Head slant check in the vertical direction

Summary of Contents for ValueJet VJ-1324
























































































































































































































































































































































































































































Reviews:

No comments