MUTOH ValueJet VJ-1324 Maintenance Manual Download Page 253

Page: 253 / 439

3.13.5 Replacing Take-Up Unit Control Board Assy

P.3-171

3.13 Replacing Take-Up Unit (Option)

VJ1324E-M-02

(3) Replacing Power Board Assy

1. Remove take-up scroller.

Remove tension arm.

"3.13.1 Removing Tension Arm" p.3-162

Remove take-up unit.

"3.13.2 Removing Take-Up Unit" p.3-164

Remove board chassis.

"(1) Removing Board Chassis" p.3-169

"3.13.5 Replacing Take-Up Unit Control

Board Assy" p.3-169

Remove AC cable Assy and DC cable Assy from the connector on power board Assy.

Remove the screws (4 pieces) retaining power supply cover on hexagon spacer.

Remove hexagon spacers (4 pieces) from power board Assy.

Remove power board Assy from board chassis.

Replace power board Assy.

10. To reassemble the unit, reverse the removal procedure.

No.

Name

Power BoardAssy

DCCableAssy

ACCableAssy

No.

Name

Power supply cover

pan-head screw with spring washer and flat washer M 4

Hexagon spacer

Summary of Contents for ValueJet VJ-1324
















































































































































































































































































































































































































































Search results

Summary of Contents for ValueJet VJ-1324

Reviews:

MUTOH ValueJet VJ-1324, Maintenance Manual, Page: 253 / 439

Search results

Summary of Contents for ValueJet VJ-1324

Reviews: