manualshive.com logo in svg

MUTOH ValueJet VJ-1324, Maintenance Manual, Page: 120 / 439

Share
Download
MUTOH ValueJet VJ-1324 Maintenance Manual Download Page 120

3.4.2 Replacing Cooling FAN 24V Assy (For MAIN Board)

P.3-38

3.4 Replacing Board Base

VJ1324E-M-02

3.4.2

Replacing Cooling FAN 24V Assy (For MAIN Board)

1.

Remove the connector of Cooling FAN(24V)Assy from MAIN Board (J30).

"3.4.4 Replacing MAIN Board Assy" p.3-42

NOTE

Cooling FAN (24V)Assy is stranded wire of 2pieces(Red,Black).Connector color is white.

2.

Remove the screws (3pieces) retaining Cooling FAN Bracket.

3.

Remove Cooling FAN Bracket.

4.

Remove the screws (2 pieces) retaining Cooling FAN.

5.

Replacing Cooling FAN (24V)Assy.

NOTE

• When reassembling Cooling FAN (24V) Assy, note the direction of label attached to Fan. 

If it is reassembled on the opposite direction (inside/outside), the direction of ventilation 
reverses

• During installation, be careful not to nip Cable.
• Be careful with the direction of Cooling FAN cable.

6.

To reassemble the unit, reverse the removal procedure.

No.

Name

1

connector of Cooling FAN(24V)Assy 

1

2

1

2

No.

Name

1

Cooling FAN Bracket

2

Tapping screwM3

×

6 S Tight cup 

No.

Name

1

Cooling FAN(24V)Assy

2

Pan-head screw with spring washer and flat washer M3

×

20

2

1

Summary of Contents for ValueJet VJ-1324
























































































































































































































































































































































































































































Reviews:

No comments