manualshive.com logo in svg

MUTOH ValueJet VJ-1324, Maintenance Manual, Page: 339 / 439

Share
Download
MUTOH ValueJet VJ-1324 Maintenance Manual Download Page 339

5.7.10 Longstore Menu

P.5-53

5.7 Adjustment Menu

VJ1324E-M-02

5.7.10

Longstore Menu

This menu is used to clean the ink tube and print head with cleaning liquid.
Follow the procedures below when cleaning..

1.

Press [Enter] key in the operation panel to determine the Head Cleaning Menu.

2.

Remove all ink cartridges.

3.

Press [Enter] key in the operation panel to discharge ink.

NOTE

T

When performs the ink discharge only for maintenance parts replacement (Solenoid head 
Assy, Ink tube, Carriage Assy,  etc.), turn OFF the power now.

4.

After ink is discharged, install the cleaning cartridge.

5.

Press [Enter] key in the operation panel to charge cleaning liquid.

6.

After cleaning liquid is charged, remove the head cleaning jig

.

㧼㨘㨑㨍㨟㨑ޓ㧾㨑㨙㨛㨢㨑ޓ㧯㨍㨞㨠㧚

㧭㨐㨖㧚㧝㧝㧦㧸㨛㨚㨓㨟㨠㨛㨞㨑

㧯㨔㨑㨏㨗ޓ㧠㧦㧭㨐㨖㨡㨟㨠㨙㨑㨚㨠

㧵㨚㨗ޓ㧰㨕㨟㨏㨔㨍㨞㨓㨑

㧵㨚㨟㨑㨞㨠ޓ㧯㨘㨑㨍㨚㨕㨚㨓㧯㨍㨞㨠㧚

㧴㨑㨍㨐ޓ㧯㨘㨑㨍㨚㨕㨚㨓

㧾㨑㨙㨛㨢㨑ޓ㧯㨍㨞㨠㨞㨕㨐㨓㨑㨟

㧴㨑㨍㨐ޓ㧯㨘㨑㨍㨚㨕㨚㨓

Remove the cleaning jig and press [Enter] key to discharge 
                                                                      shipping liquid

After cleaning liquid is charged

Set the cleaning cartridge and press [Enter] key to charge cleaning liquid

Remove all cartridges and press [Enter] key to discharge ink

Finish Ink Discharge

Summary of Contents for ValueJet VJ-1324
























































































































































































































































































































































































































































Reviews:

No comments