MUTOH ValueJet VJ-1324, Maintenance Manual, Page: 359 / 439

5.12.2 PF Motor Assy Endurance Menu P.5-73
5.12 Endurance Running Menu VJ1324E-M-02
5.12.2 PF Motor Assy Endurance Menu
This menu is used to perform media feeding operation to perform the endurance running of PF motor
Assy .
The available settings are shown below.
T I P
• The following table shows the motor transfer parameters to media feed amount.
• If the number of endurance running cycles is set to -1, the PF motor Assy continuously repeats
endurance running until cancel input is given from Operation panel.
• The maximum counter value for endurance running cycles is 99999999 (up to 8-digit number).
If the number of cycles exceeds the maximum value, the counter displays 99999999.
Set item Contents Set value Remark
Media feed amount Set the media feed
amount per endurance
running cycle. 0.1 to 100 Unit: mm
Number of endurance
running cycles Set the number of
endurance running
cycles. -1 to 10000 -
Speed
35cps
Acceleration
0.1G
Deceleration
0.1G
Enter a media feed amount by using ±.
Range : 0.1mm to 100.0 mm
Endurance Count
Performing endurance
[Enter]
[Enter]
[Enter] or [Cancel]
[Enter]
[Enter]
[Cancel]
[Cancel]
㧯㨔㨑㨏㨗㧥㧦㧱㨚㨐㨡㨞㨍㨚㨏㨑