MUTOH ValueJet VJ-1324, Maintenance Manual, Page: 286 / 439

4.9.2 Adjustment Procedure P.4-23
4.13 Cutter position adjustment VJ1324E-M-02
4.13 Cutter position adjustment
T I P
Use dedicated Jig
1. Open front cover.
2. Release Carriage lock.
"3.7.1 How To Release Carriage Lock" p.3-98
3. Move Carriage to Platen.
4. Loosen the screw (1piece) retaining Cutter holder B.
5.
6. Set Cutter adjustment Jig.
7.
8. Lightly Press the cutter holder B in obliquely downward, and fix the screw (1piece).
9.
10. To reassemble the unit, reverse the removal procedures.
No. Name
1
Pan head screw with spring washer and flat washer M3 × 6
2 Cutter holder B
Cutter adjustment Jig
2
1
No. Name
1 Cutter adjustment Jig
No. Name
1
Pan head screw with spring washer and flat washer M3
×
6
Set the jig to the back side in groove
1
1
ᴦౕ
Back front
Section View
,KI
Fix the screw while pressing
the cutter to the convex of Jig.
Cutter